초리코리아 주식회사
초리코리아 주식회사
대표 : 마츠오카 마코토
Tel : 02-761-4128 / 4127(관리)
        070-5121-3992/ 3391(영업)​
주소 : 서울시 영등포구 여의나루로 67,
14층 1404호(여의도동,신송빌딩)
Email : gy-yi@chorikorea.co.kr

Copyright©초리코리아 주식회사
All rights reserved. [ADM]

 주요취급품
  > 사업분야 > 주요취급품

CHORI에서는 인간 생활 전반적인 부분에 필요한 원료 등을 고객사의 요구에 맞춰서 공급하고 있습니다.
우레탄, 플라스틱, 스티로폼, 페인트 등의 아주 기초적인 제품의 원료부터 식품 첨가제 및 건강식품, 비타민, 및 의학 및 약의 원재료 까지 취급하고 있습니다.

1. POLYLACTIDE DIOL

Polylactide diol is ring opening polymerization from Lactide monomer.
1) Advantages
-In resins, to improve the flexibility, mobility and low Temp resistance, mechanical propertise, etc.
- In PU, to improve cohesive strength and adhension, abrasion resistance, oil resistance, etc.
- With biocompatibility, used in the field of biomedicine.
- It have good optical performance, bright color, chemical/thermodynamic stability.
2) Main Applications
- UV resin
- Water-based coating
- PU elastomer/TPU

2. PCL POLYOL

PCL Polyol is ring opening polymerization from e-carprolacton monomer.
1) Advantages
-High reactivity, low viscosity, narrow M.W, low acid value and water cont, etc.
- Better than polyether diol with strength, UV resistance, heat resistance, etc.
- Better than adipic acid polyester series with hydrosis resistance and flexibility.
2) Main Applications
- PUE/TPU
- Coating/Paint
- Adhesive

3. PTMG_Poly(tetramethylene ether)glycol

PTMG는 선형 Polyether glycol 과 양 말단에 Hydroxyl(OH기)를 가진다.
폴리올로서 (MDI, TDI, IPDI, H12MDI)와 반응하여 아래의 우수한 특성을 가지는 고분자를 형성한다.
1) Grade ( 숫자는 분자량 )
PTMG650, PTMG850, PTMG1000, PTMG1300, PTMG1500, PTMG1800, PTMG2000, PTMG3000,
개발중 : PTMG250, PTMG4000
- 고객사의 요구에 맞추서 분자량 조절 가능
2) Cas NO.: 25290-06-1

4. DMT(Dimethyl Terephthalate-solid)

DMT는 ethylene glycol과 반응하여 polyethylene terephthalate (PET)이 되고, butanediol과 반응하여 polybutylene terephthalate (PBT)이 됩니다.
추가 공정을 통해 filaments, staple fibres, foils, films 그리고 moulding compounds을 생산합니다.
monohydric alcohols과 반응하여 가소제로 사용되는 terephthalate esters를 생산합니다.
2-ethylhexanol과 반응하여 dioctyl terephthalate (DOTP)를 생산합니다.
1) CAS NO.:120-61-6
2) EINECS no.: 204-411-8
3) Molar weight: 194.2 g/mol
4) Packaging: 1.000 kg big bag
5) Appearance : white flakes/briquettes
6) DMT content : min. 99.9%
7) Solidification point : 140.63 – 140.64 °C
8) Hazen colour of melt at 150 °C : max. 10
9) Acid value : max. 0.03 mg KOH/g

5. Low Loss Tangent LCP for 5G

(5G용 저유전정접LCP)
유전율을 상당히 낮춘 내열성 차이에 따른 2개의 grade가 있습니다.
5G용 Flexible기판용 Film의 원료로서 PI보다 뛰어난 물성을 제공합니다.
* A-5000은 320도, P-9000은 350도, shear rate는 1000s-1
2) LCP의 기본골격 모노머
p-hydroxybenzoic acid + 6-hydroxy-2-naphthoic acid

6. 12-HSA (12 Hydroxy Stearic Acid )

7. Polycarbonatediol( Bio Based PCD )

Polycarbonatediol(PCD)는 선형Polycarbonate기와 양 말단에 Hydroxyl(OH)기를 가진다.
(MDI, TDI, IPDI, H12MDI)와 반응하여 아래의 우수한 특성을 가지는 고분자를 형성한다.
특허제조기술로 만들어진 PCD는 안정적인 제품의 품질을 가능하게 합니다.
Benebiol Seris 중 일부 제품은 세계에서 유일하게 Biomass-based(식물성분) PCD입니다.
1) 내화학성( Chemical resistnace )
2) 높은 강도( High hardness )
3) 높은 기계적 특성( High mechanical properties )
4) 내후성( Wheather rseistnace )
5) 내수성( Hydrolysis resistance )
6) 식물성분( Bio-massed )
7) 내마모성( Abrasion resistance )
8) 저온 유연성( Flexibility at low temperature )